Editing Hacking (section)

=== [[Particle Accelerator]] ===

[[File:ParticleAccelerator.gif|link=Particle_Accelerator]]


What safer way to release the [[singularity]] than doing it REMOTELY! That, or you can hack it to make it shoot more powerful particles!

#Setup the PA if you haven't already, then use a screwdriver on the computer to open the panel/expose the wires.
#Now click on the computer with a hand to bring up the wire menu. Here you can then get your tools in hand.
#*'''Power wire''': ''Pulsing'' toggles the PA on or off, ''cutting'' it will disable the PA and stop it from turning on.
#*'''Strength wire''': ''Pulsing'' increases the strength of the PA, ''cutting'' it will set the strength to 0 and prevent people turning it up.
#*'''Interface wire''': Interface wire will stop people being able to use the control computer. ''Pulsing'' will toggle this, ''cutting'' will turn it off until mended.
#*'''Limit wire''': ''Cutting'' will allow the PA to be turned up to strength 3. When ''pulsed'' it will make a large whirring noise.
#*'''Nothing wire''': Will do nothing, it's just here to make it harder.
#Close the panel for the PA to then work again. '''IMPORTANT:''' Don't forget to scan the parts again.

You can also attach a [[Signaler]] to these wires to release the singularity, such as remotely pulsing the strength wire. Bonus points if you also pulse the interface wire so that people can't stop it!

{| class="wikitable" style="text-align:center"
|+Wires
!Name
!Cutting
!Mending
!Pulsing
|-
!Power
|Disables power.||Restores.||Toggles power on/off.
|-
!Strength
|Sets strength to 0 and prevents people from turning it up.||Restores.||Increases the strength.
|-
!Interface
|Stops people from being able to use the control computer.||Restores.||Toggles interface off/on.
|-
!Limit
|Allows PA to be turned up to strength 3.||Restores.||Makes a large whirring noise.
|-
!Nothing
|Nothing.||Nothing.||Nothing.
|}

==== How To ====

# Set up the Particle Accelerator
# Screwdriver the monitor open
# Pulse the wires from up to down until you get the prompt stating that there's a whirring sound
# Cut the wire which prompted the statement
# Pulse the wires from up to down except for the limit wire
# Set up the tesla

Can easily be done in <30 seconds