Editing Singularity and Tesla engines (section)

== In Case of No Power ==
No engineers or only lazy bastard engineers and none of them set up the engine? Fear not, follow these steps and you'll see how easy it is to jump-start the engine even with 0 W power in the network.
# Set up the PA and either tesla coils/grounding rods or rad collectors/singularity generator.
# Switch off input for all SMES.
# Find the [[Pacman|P.A.C.M.A.N.-Type Portable Generator]] inside Engineering.
# Install the PACMAN on an exposed wire in engineering connected to the powernet, load it with plasma sheets (found in the Engineering Secure Storage) and switch it on.
# Switch the emitters on and they should now start firing! Switch the field generators on while you're out there, too.
# Load a new full power cell to the Engineering APC so the PA gets power (set equipment on and everything else off to preserve power for now).
# Switch the PA on and you're winner!
# Once the engine is contained and running, switch SMES input back on.