8 Tips To Increase Your Ghost Immobiliser Problems Game

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. It's discreet and does not require additional key fobs in order to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be modified up to 20 times. This will then authorize the start-up of your vehicle.

Simple PIN Code Change Process

Many owners are upgrading their security due to the increase in vehicle theft. There are many kinds of security products that are available for sale that range from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking system may assist you in locating your vehicle in the case of theft, it can not prevent the crime from occurring in the first instance. An immobiliser, on the other hand, does exactly what it says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to take your car.

The ghost device uses the buttons on your car to create an unique sequence that needs to be entered in order for the engine to begin. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This feature is particularly beneficial if you have to hand your car over for valet parking or maintenance, as the immobiliser will remain activated and not disabled.

The Ghost is a very unique and innovative device which is used in conjunction with the buttons on your vehicle instead of being a separate device. It's not just an effective deterrent to vehicle theft and vandalism, but it can be used to secure any future vehicles you may own. This makes it a much better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch local ghost immobiliser installer Immobiliser is a sophisticated security system that protects your car from key hacking and cloning. It also blocks ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to disable the motor. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to ensure it is compatible with all vehicles. It is also resistant to jamming devices which is an approach used frequently by car thieves to circumvent existing immobilisers.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technologies as well as recognized by conventional diagnostic tools. The Autowatch ghost doesn't emit LED indications and uses the buttons inside your vehicle like the steering wheel or centre console panels to create a unique, customizable disarm sequence. The sequence can be extended 20 presses for additional security. The iPhone app only allows one connection, with a unique pairing code for the Ghost. All communication between the two devices is protected.

The ghost installations reviews (information from Mystrikingly) also stops car thieves from adding an additional key or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with set parameters such as 30mph speed limit) so that you can hand your car over to a valet service for servicing without the need to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals to block your car's system from performing its normal startup routine until you input an individual passcode. The system can be activated and deactivated by using your smartphone's application without the need for additional wires.

The standard factory immobilisers work with a transponder which is built into the key. It transmits a message to the ECU. The car will begin to start if the correct code is sent. However, if a transponder of a different vehicle is used instead, the immobiliser won't recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser was created by an South African company at the top of security systems for vehicles technology. It guards you against hacking or key cloning, and even key theft. Only by physically towing your car away could a thief take it away, and they would still not be able drive it.

Ghost uses the buttons in your car, such as the indicator stalk, steering wheel and door panels to create a unique PIN sequence that can be changed that must be entered prior to you can drive. This is performed without the need for extra hardware such as keys-fobs, and can last up to 20 presses long. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that an installation has been made.

Ghost is more difficult to get rid of than car alarms that require disarming by pressing a series of buttons. This makes it a great alternative to a GPS tracker that can assist in locating your car after it has been taken.

Override of emergency PIN code

You don't have to look far on social media for stories or videos of vehicles that have been stolen with the most advanced technology tools. This includes key-cloning and hacking devices that allow you to start your car without the original keys.

The Ghost immobiliser helps combat this issue and offers an additional layer of security to prevent your vehicle from being stolen in the event of being targeted by thieves. It creates a unique pin code by pushing the buttons on your steering wheel, door panel, and the centre console. This unique PIN has to be entered along with your original key fob in order to prevent the vehicle from starting. The unique override pin is found on a black plastic card that you will receive after the installation. It is easy to remember because there are no LED indicators.

The device is hidden within the wiring of the vehicle and does not emit radio signals. This means it can't be detected by diagnostic software that can determine the security system you have installed. This makes it a fantastic alternative to a tracker.

Unlike most other security systems that use a relay in the engine bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This allows them to disable a vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm, or tracker to these systems but this must be specified before installing the device. They are also service/valet-mode compatible and are a great alternative to a tracker when having your car in for an electrical fault at the dealers.

Service/Valet Mode

In recent times, there has been a increase in vehicles being stolen with no owner's keys. It is easier than ever to steal your pride & joy with the availability of key cloning devices and door lock picks. We've developed the Autowatch ghost immobiliser 2 Immobiliser to combat this. It stops your car from being driven, even if your keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't use radio frequency or keys fobs. This means it isn't detected by diagnostics or any other car hacking devices. It also stops you from adding an ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden within your car and can be reached via the buttons on your steering wheel, the centre console and door panels. Before you can start your car, you must enter a unique and changeable PIN number that is up to 20 numbers.

This is the first aftermarket immobiliser CAN bus that has been designed to stop your car being started or driven away without a PIN code being entered prior to. If you're driving away with the device in motion, an indicator will appear on your dashboard and flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function as normal. If you do not enter your PIN at this point, the indicator will continue to flash and will require another PIN code for every attempt to start your vehicle.